IFU for EDTA K2/K3 Vacuum Blood Collection Tubes

【Product Name】Vacuum Blood Collection Tube

【Additives】EDTA K2/K3

【Tube Size】:13x75mm (1-5ml) , 13x100mm (6-7ml), 16x100mm (8-10ml)

【Tube Materials】PET/Glass , Rubber/Plastic Caps

【Range of Application 】For human venous blood collection and storage

This tube contains EDTA as an anticoagulant - used for most hematological procedures. The tubes should be

filled with the proper amount of blood for the size of tube used, to avoid RBC shrinkage due to excess EDTA

and possible dilutional effect.

【Using Method 】Once finished blood sample collection , please gently shake the tube in time for about 5-8 times to fully mix with the additives inside the tube then get the blood samples .

【Attentions】

1. Please check the expired date before use.
2. Please make sure the tube is no breakage before use.

3.Our vacuum blood tube’s workmanship is reference the Plains, so please noted us to adjust the vacuum in the tube if you need tubes for plateaus areas.

4.The blood collection volume is affected by factors such as terrain, environmental temperature, production time, blood collection tube material, blood collection technology, etc. Even the the same batch of blood collection tubes also cannot be 100% consistent.

【Storage】

Please store in a dry and well-ventilated place, 4-29 degrees Celsius is recommended, away from heat sources, no harmful or corrosive substances around, pay attention to sun protection and rain and snow during transportation, do not mix with harmful substances, and avoid violent loading & unloading during transportation.

【Shelf time】2 years